QAQC Piping & Welding Inspector
Job post no longer accepts applications
Job Description and Qualifications
POSITION SUMMARY
The QAQC Inspector - Piping / Welding is responsible to ensure that all field piping / welding construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.
III, NATURE AND SCOPE
Safety & Quality are very important aspect in all project phases,
Travel might require for this position both short & long business trips as needed.
IV. DIMENSIONS:
V. PRINCIPAL ACCOUNTABILITIES
An approved QAQC Inspector - Piping / Welding has the responsibility and commensurate authority to accomplish the following duties:
This position is accountable for the following end results:
V. MINIMUM REQUIREMENTS AND QUALIFICATIONS
Desirable Qualifications, Experience and Skills
POSITION SUMMARY
The QAQC Inspector - Piping / Welding is responsible to ensure that all field piping / welding construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.
III, NATURE AND SCOPE
Safety & Quality are very important aspect in all project phases,
Travel might require for this position both short & long business trips as needed.
IV. DIMENSIONS:
- Coordinating site construction activities with Engineers / QC Piping - Welding Inspectors of EPC Sub-contractors and Client.
- Working in a Mega size project
- Multi- project Type: EPC Oil & Gas, Petrochemical, Infrastructure Plants
V. PRINCIPAL ACCOUNTABILITIES
An approved QAQC Inspector - Piping / Welding has the responsibility and commensurate authority to accomplish the following duties:
- Reporting to Site QAQC Manager.
- Oversee and coordinate inspection of on-plot UG & AG Piping system for the project scope.
- Monitoring and implementation of QMS Procedures, PQP, ITP, method statements and reporting deviations from the management system and contractual requirements of the project.
- Verifying that all necessary inspections and tests, as required of the project and by statutory regulations, are carried out and appropriate records are updated and maintained.
- Coordinating quality activities with subcontractors and any other individual parties who may be working on the same site.
- Coordination with clients and third party inspection, in accordance with approved ITP, for agreed witness inspections & tests.
- Monitoring NDT Special Process application, interpretation of results, interpretation of codes and standards, assist with preparation of procedures.
- Carry out Daily monitoring of Subcontractor Welding activities including Welder Performance, WQT, WPS / PQR review and application. Control of Weld Defect / Rejection rates and Repair actions / penalty status.
- Monitor Visual Inspection, Radiography/RTFI, UT(MUT - Manual UT), AUT (Automatic UT - ToFD or Phased Array), Magnetic Particle, and Liquid Penetrant Testing.
- Ensuring close-out of all open issues / punch-points within the time frame agreed with the client.
- Reviewing and performing material receiving inspection as per company and client requirements utilizing the applicable standards and specifications.
- Performing assigned in-process and final products inspection and tests as identified in the Approved Inspection and Test Plans.
- Reviewing Sub contractor Procedures related to Piping Work Fabrication, Construction and Testing including Tie in or Hot tap as required.
- Monitoring Installation of Piping systems and pipe line for U/G, A/G Piping in either C/S, S/S, Aluminum, RTR, PVC, CPVC, GRE, GRVE, GRUP etc and verifying the related QC documentation.
- Preparing inspection & test reports of completed inspections & tests.
- Ensuring all equipment's, tools and materials meet with the project quality requirements and that personnel have been adequately trained to use them safely.
- Identification of non-calibrated equipment's and informing Subcontractor QC for expediting arrangements with Calibration agencies for timely calibration of the equipment's.
- Liaise with client representative concerning quality matters on site.
- To be conversant with the company QHSE procedures & policies and ensure that all the people on the site observe and implement them.
- Identifying near miss and nonconformities in materials, products, processes, procedures and reporting the near miss / nonconformities in the near miss / nonconformity report.
- Verification of implementation of corrective & preventive actions against the nonconformities and reporting results to line managers.
- Preparation and review of final quality dossiers / test packs.
- Submit weekly report and requested information / statistics to Department QA/QC Manager
- Liaise with QAQC Lead - Piping/Welding for all aspects of quality.
This position is accountable for the following end results:
V. MINIMUM REQUIREMENTS AND QUALIFICATIONS
- Diploma or Bachelor's degree -in Mechanical Engineering.
- Total 10 year of Experience of which 05yrs QC experience with direct scope description as Piping inspector/or supervisor in an EPC project.
- Saudi Aramco CBT Passed & previous project Approval.
- Knowledge of the ISO-9000 series International Standards
- Welding CSWIP 3.1 certified
- Knowledge of Underground Piping CS, SS, RTR, PVC, CPVC, GRE, GRVE, GRUP etc
- Knowledge in applicable industry standards and specifications like ASME Sec 1, V, VIII and IX, ANSI B31.3/4/8.
- Have knowledge in welding inspection and fabrication of piping and vessels to international codes (ASME,API) would be beneficial.
- Have experience and thorough knowledge of codes such as ASME B31.3, 31.4 and 31.8, ASME section VIII, API, ASTM and general piping system installation related codes and standards.
- Have experience of piping and support installation, Pressure Testing and Pipework cleaning and associated activities for insulation and coating.
- Ability to read and interpret Piping Isometrics and P & ID.
- Strong communicator written and oral
- Strong and effective coordinator
- Organized, disciplined, able to perform under pressure and manage multiple priorities and parallel tasks
- Strong Microsoft software skills, particularly Excel
- Report writing skills
- Experience of working in a multicultural project team
Desirable Qualifications, Experience and Skills
- Saudi Aramco CBT Passed & previous project approval.
- Previous oil & Gas Pipeline experience
- Licensed Professional Mechanical Engineer
JOB SUMMARY
QAQC Piping & Welding Inspector
Quwayiyah
5 months ago
N/A
Full-time